Cartesian Gantries

Cartesian Gantries

ALIO’S cartesian gantries are characterized by large work areas and superior accuracy

A gantry robot consists of a manipulator mounted onto an overhead system and allows movement across a horizontal plane. Gantry Robots are also called linear or cartesian robots and are typically large systems built with linear guide rails that undertake pick and place actions. They can also be used in applications such as welding. Cartesian Gantries are relatively simple to program when compared to alternative motion control solutions, in addition they are not limited by floor space constraints. 

Micron 2 SNH-G

  • 100mm XY to 1m XY travel
  • Up to 3.5G acceleration (controller dependent)
  • Standard and ULTRA precision grades to <1.5µm accuracy
  • Linear resolution 5nm standard
  • Position trigger capable with ALIO controller
  • Yaw compliance to command angular alignment (standard)

Micron 2 S-G

  • 100mm XY to 1m XY travel
  • Up to 3.5G acceleration (controller dependent)
  • Standard and ULTRA precision grades to <1.5µm accuracy
  • Linear resolution 5nm standard
  • Position trigger capable with ALIO controller
  • Yaw compliance to command angular alignment (standard)

Micron 2-G

  • 100mm XY to 1m XY travel
  • Up to 3.5G acceleration (controller dependent)
  • Standard and ULTRA precision grades to <1.5µm accuracy
  • Linear resolution 5nm standard
  • Position trigger capable with ALIO controller
  • Yaw compliance command angular alignment (standard)

Micron 2 SNH-2

  • 100mm XY to 1m XY travel
  • Up to 3.5G acceleration (controller dependent)
  • Standard and ULTRA precision grades to <1.5µm accuracy
  • Linear resolution 5nm standard
  • Position trigger capable with ALIO controller
  • Yaw compliance to command angular alignment (standard)

Micron 2 X-G

  • 100mm XY to 1m XY travel
  • Up to 3.5G acceleration (controller dependent)
  • Standard and ULTRA precision grades to <1.5µm accuracy
  • Linear resolution 5nm standard
  • Position trigger capable with ALIO controller
  • Yaw compliance to command angular alignment (standard)

Micron L-G

  • 100mm XY to 1m XY travel
  • Up to 3.5G acceleration (controller dependent)
  • Standard and ULTRA precision grades to <1.5µm accuracy
  • Linear resolution 5nm standard
  • Position trigger capable with ALIO controller
  • Yaw compliance to command angular alignment (standard)

Send us details of your motion control and part positioning requirements.

Our team will quickly evaluate and recommend the best solution to meet your specifications. Upload your part drawing files or sketches on our Contact Us form below.

Please contact us – we are ready to assist!